The platform
Monitor, analyse, alert and control from a single interface. Put measurements in perspective and track performance, from the site to the whole portfolio.
Understand and act
Energy efficiency platform
for buildings
Building monitoring and control.
Wi-Sense brings together energy, comfort and usage to control your consumption, monitor your equipment and track the effects of your actions.
A prioritised view to know where to act.Monitoring illustration.
Monitoring. Analysis. Alerts. Control. Performance tracking.
Discover the solution ↓








Know where the energy goes.
Spot drifts and needless usage.
Alert, schedule, control.
Measure the effects of your actions.
01 / A COMPLETE SOLUTION
Wi-Smart Consumer combines the Wi-Sense platform with equipment suited to your building, and supports you through its integration.
Monitor, analyse, alert and control from a single interface. Put measurements in perspective and track performance, from the site to the whole portfolio.
Understand and actSensors, meters and automation devices that are selected, pre-qualified and configured for integration. They complement what is already there where measurement or action is needed.
Measure and controlAnalyse what exists, define the useful scope, integrate the equipment and follow the results. Wi-Smart Consumer works directly or with partners depending on the project.
Deploy and evolveA project built around your usage, your installations and your priorities.
How it fits with what you already have ↗02 / CONCRETE APPLICATIONS
Cut unnecessary consumption. Detect anomalies. Adapt operation to usage. And measure the results.
HVAC / CONTROLLED TEMPERATURES
Maintain comfort during occupancy; switch to eco mode at night and at weekends. Wi-Sense lets you schedule heating and air conditioning according to usage and to what the installation allows.
Control relies on the existing regulation or on complementary equipment, depending on the project.
LIGHTING / SCHEDULE AND CHECK
Schedule switch-off outside opening hours while preserving authorised uses. Time slots and exceptions follow the needs of the site.
Sub-metering then lets you check that switch-off really took place and spot residual consumption.
EQUIPMENT / MONITOR AND ALERT
Monitor how equipment is running and report unusual situations to the right people.
For a heat pump, power readings help spot an abnormal shutdown. After the intervention, tracking operation and temperatures helps confirm a return to normal.
WATER / SPOT THE DRIFTS
A persistent flow outside activity hours can signal an anomaly. Wi-Sense can raise an alert so the cause is investigated, then check the effect of the intervention.
Thresholds make sense in the light of schedules and expected usage: weekend consumption can be unusual even if it stays below a general threshold.
03 / EXPLORE WI-SENSE
Move from the overall view to the useful detail. Understand a situation, spot anomalies and follow results.
Visualise zones, equipment and measurements on a clear representation of the building. Place a piece of information in its environment to understand faster where to act.
A more concrete reading of the building and its action priorities.
Schedule automatic reports, share the relevant indicators and keep readable histories for operations, internal follow-up or display to occupants.
Schedule the sending, keep the history and share the same benchmarks.
The air-conditioning simulator estimates the impact of a setpoint temperature based on the assumptions entered. It helps compare settings before making a decision.
Compare a setpoint
Three values taken from Wi-Sense materials. This example is not an estimate for your building nor a guaranteed saving.
A summary score and its indicators make comfort and air quality easier to read. The detail identifies the dimensions that need attention.
Visual demonstration with fictitious but consistent values. This score is neither a real measurement nor a certification of the building.
Centralise administrative, technical and regulatory documents. Keep a record of actions, checks and savings, and anticipate deadlines with automatic reminders.
Documents gathered. Actions traced. Deadlines tracked.
04 / CONNECT WITHOUT REDOING EVERYTHING
Make use of existing BMS/BAS systems, meters and equipment that already communicate. Add the measurements and controls that are useful, where they are missing.
The Internet of Things links sensors and equipment to transmit their measurements and commands.
Radio links considerably reduce communication cabling.
Power supply, radio coverage, compatibility and the work required are studied for each building.
Technologies brought together around the building.BMS/BAS, connected devices and communicating equipment: an integration suited to each building.
Start from your installation ↗05 / MEASURE THE RESULTS
What savings can suitable scheduling bring? Let’s take the HVAC example shown under usage, then put this projection in perspective with the building’s measurements.
This example is an illustrative projection, not a guaranteed saving nor a certified customer result.
TEMPERATURES / 2,400 m² COMMERCIAL BUILDING
ESTIMATED ANNUAL SAVINGS
≈ 4,000 € excl. VAT/year
≈ 23,000 kWh saved per year
Annual projection weighted by season. Over the illustrative week: about 20% less consumption, i.e. 500 kWh avoided.
2,400 m² commercial building fitted with a reversible heat pump. Comfort from 8 am to 8 pm on weekdays, eco at night and at weekends.
Periods used: air conditioning from 15 May to 15 October; heating from 1 November to 30 April. Economic assumption: €0.17 excl. VAT/kWh. Rounded values.
These figures illustrate a scenario. The result of a project depends in particular on initial settings, occupancy, weather and equipment.
THE SAME EXAMPLE, FROM ACTION TO RESULTS
Here is the temperature scheduling chart shown in the “Usage” section: comfort during occupancy, eco mode outside activity.
The before/after comparison illustrates the action whose savings are estimated above. Actual measurements will then be analysed taking the building’s operating conditions into account.
Review the HVAC example under usage ↗CHECK OVER TIME
Define a reference situation. Document the actions. Compare consumption taking weather and occupancy into account. Keep the histories and useful evidence.
A measurement and verification approach compatible with IPMVP principles, to be defined according to the project.
REGULATIONS / DOCUMENTATION / FOLLOW-UP
Energy regulations require you to reduce, track and document. Wi-Sense brings together the information needed to run the building efficiently and to prepare the required filings.
Obligations vary by building and equipment. The platform alone does not guarantee regulatory compliance.
What the scheme requires. For the commercial buildings concerned (from 1,000 m² of commercial activity), targets for reducing final energy consumption and an annual declaration of consumption on OPERAT.
What Wi-Sense makes easier. Reduce consumption by identifying drifts and adapting how equipment runs to usage. Measure the results, track reduction trajectories and prepare the data needed for OPERAT declarations.
Reference targets and modulation options to be assessed according to the building’s scope.
Official text and procedures ↗What the scheme requires. For the commercial buildings concerned, put in place an automation and control system for technical installations able to track their data, analyse their performance, detect drifts and adapt their operation to needs.
What Wi-Sense makes easier. Connect existing equipment, add suitable measurement and control devices and centralise monitoring in a single interface.
Thresholds, deadlines, required functions and any exemptions depend on the building; the whole installed system must be assessed.
Understand the BACS requirements ↗Automatic reports, histories and documentation of interventions make it easier to track consumption and prepare supporting documents. This is an operational support for the obligations above, not a separate regulation.
The Value Logbook centralises the building’s documents — contracts, diagnostics, plans, interventions and regulatory items — and helps anticipate the deadlines entered thanks to its automatic reminders.
Document organisation that supports technical management and the enhancement of the property portfolio.
ONE PLATFORM / TWO WAYS TO DEPLOY
The expertise of integrated projects, the simplicity of targeted kits: the same Wi-Sense foundation to track your equipment and your usage.
INTEGRATED PROJECTS
Monitoring, BMS/BAS, sub-metering, regulation and control depending on the configuration. Wi-Smart Consumer supports you in integrating with existing installations.
Request a study ↗WI-SENSE KITS
Standardised solutions, bought directly or through a professional distributor. Independent installation where needed, with the associated Wi-Sense services.
Discover the kits ↗DO YOU DISTRIBUTE ELECTRICAL EQUIPMENT?
OTHER APPLICATIONS
CO₂, fine particles, temperature and humidity: Wi-Sense also supports environmental monitoring of motor-racing circuits.
Explore this application ↗06 / LET’S MOVE TO YOUR BUILDING
Let’s start from your usage, equipment and existing data to identify the measures and actions that are genuinely relevant.
A building or a portfolio, an existing installation or a targeted need: tell us where you are starting from.
Wi-Sense, a solution designed by Wi-Smart Consumer.