WI-SENSE SUB-METERING / CONTROL
Measure your consumption.
Control your equipment.
Track your building’s electricity consumption and identify needless operating periods with Wi-Sense. With the Control configuration, you can also command your compatible equipment and schedule their operating hours.

TWO CONCRETE USES
Understand where
your electricity goes.
Overall electricity consumption
Track instantaneous power and energy consumed on your building’s electrical supply, depending on the configuration chosen.
Lighting circuit
Measure a lighting feeder to identify operating periods and needless consumption.
With the Control configuration, a compatible circuit can also be operated manually or on a time schedule.
ONE OFFER / TWO CONFIGURATIONS
Measure.
And control, as you choose.
| Feature | Sub-metering | Sub-metering + Control |
|---|---|---|
| Instantaneous power (kW) | Yes | Yes |
| Energy consumed (kWh) | Yes | Yes |
| Measurement history in Wi-Sense | Yes | Yes |
| Manual on/off control | No | Yes |
| Time scheduling | No | Yes |
MEASUREMENT CAPACITY
2 three-phase points
or 6 single-phase points
Up to 2 three-phase measurement points or up to 6 single-phase measurement points, in both configurations. Two alternative capacities.
WITH THE CONTROL CONFIGURATION
Up to 2 lines
single-phase or three-phase
Control capacity is independent of the number of measurement points. Not every measured circuit can necessarily be controlled.
A control suited to the circuit.
Control applies to electrical circuits compatible with on/off control by contactor. The contactor is matched to the circuit’s characteristics and operated by the Wi-Sense controller.
Control functions: manual on/off and time scheduling.
INSTALLATION / ACTIVATION
Your electrician installs.
Wi-Sense takes over.
- 01
Choose
Your configuration and your hardware version: Wi-Fi or LoRaWAN.
- 02
Have it installed
Your electrician carries out the installation and connections.
- 03
Identify and activate
The QR code enables secure identification and activation of the kit.
- 04
The environment is prepared
Automated software provisioning prepares the associated environment in Wi-Sense.
- 05
Access Wi-Sense
Find your measurements and, depending on the configuration chosen, your control functions.
PREPARE YOUR PROJECT
Two choices.
A suitable offer.
Choose the functions you need and the connectivity suited to your project. Wi-Fi and LoRaWAN correspond to two distinct hardware versions, to be chosen when ordering.
Sub-metering · Connectivity to be confirmed
Let’s talk about your project ↗Back to the Wi-Sense kits ↗
presents Wi-Sense